netscaler.adc.aaauser module – Configuration for AAA user resource.

Note

This module is part of the netscaler.adc collection (version 2.6.0).

It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netscaler.adc.

To use it in a playbook, specify: netscaler.adc.aaauser.

New in netscaler.adc 2.0.0

Synopsis

  • Configuration for AAA user resource.

Parameters

Parameter

Comments

aaauser_auditnslogpolicy_binding

dictionary

Bindings for aaauser_auditnslogpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_auditsyslogpolicy_binding

dictionary

Bindings for aaauser_auditsyslogpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_authorizationpolicy_binding

dictionary

Bindings for aaauser_authorizationpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_intranetip6_binding

dictionary

Bindings for aaauser_intranetip6_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_intranetip_binding

dictionary

Bindings for aaauser_intranetip_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_tmsessionpolicy_binding

dictionary

Bindings for aaauser_tmsessionpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_vpnintranetapplication_binding

dictionary

Bindings for aaauser_vpnintranetapplication_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_vpnsessionpolicy_binding

dictionary

Bindings for aaauser_vpnsessionpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_vpntrafficpolicy_binding

dictionary

Bindings for aaauser_vpntrafficpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_vpnurl_binding

dictionary

Bindings for aaauser_vpnurl_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

aaauser_vpnurlpolicy_binding

dictionary

Bindings for aaauser_vpnurlpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

api_path

string

Base NITRO API path.

Define only in case of an ADM service proxy call

Default: "nitro/v1/config"

loggedin

boolean

Show whether the user is logged in or not.

Choices:

  • false

  • true

managed_netscaler_instance_id

string

added in netscaler.adc 2.6.0

The ID of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_ip

string

added in netscaler.adc 2.6.0

The IP of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_name

string

added in netscaler.adc 2.6.0

The name of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_password

string

added in netscaler.adc 2.6.0

The password of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

managed_netscaler_instance_username

string

added in netscaler.adc 2.6.0

The username of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

netscaler_console_as_proxy_server

boolean

added in netscaler.adc 2.6.0

The IP address of the NetScaler ADC appliance acting as a proxy server.

Define only in case of an ADM service proxy call

Choices:

  • false ← (default)

  • true

nitro_auth_token

string

The authentication token provided by a login operation.

nitro_pass

string

The password with which to authenticate to the NetScaler ADC node.

nitro_protocol

string

Which protocol to use when accessing the nitro API objects.

Choices:

  • "http"

  • "https" ← (default)

nitro_user

string

The username with which to authenticate to the NetScaler ADC node.

nsip

string / required

The ip address of the NetScaler ADC appliance where the nitro API calls will be made.

The port can be specified with the colon (:). E.g. 192.168.1.1:555.

password

string

Password with which the user logs on. Required for any user account that does not exist on an external authentication server.

If you are not using an external authentication server, all user accounts must have a password. If you are using an external authentication server, you must provide a password for local user accounts that do not exist on the authentication server.

save_config

boolean

If true the module will save the configuration on the NetScaler ADC node if it makes any changes.

The module will not save the configuration on the NetScaler ADC node if it made no changes.

Choices:

  • false ← (default)

  • true

state

string

The state of the resource being configured by the module on the NetScaler ADC node.

When present, the resource will be added/updated configured according to the module’s parameters.

When absent, the resource will be deleted from the NetScaler ADC node.

Choices:

  • "present" ← (default)

  • "absent"

username

string

Name for the user. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the user is added.

The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or

single quotation marks (for example, “my aaa user” or “my aaa user”).

validate_certs

boolean

If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Choices:

  • false

  • true ← (default)

Notes

Note

Examples

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Indicates if any change is made by the module

Returned: always

Sample: true

diff

dictionary

Dictionary of before and after changes

Returned: always

Sample: {"after": {"key2": "pqr"}, "before": {"key1": "xyz"}, "prepared": "changes done"}

diff_list

list / elements=string

List of differences between the actual configured object and the configuration specified in the module

Returned: when changed

Sample: ["Attribute `key1` differs. Desired: (<class 'str'>) XYZ. Existing: (<class 'str'>) PQR"]

failed

boolean

Indicates if the module failed or not

Returned: always

Sample: false

loglines

list / elements=string

list of logged messages by the module

Returned: always

Sample: ["message 1", "message 2"]

Authors

  • Sumanth Lingappa (@sumanth-lingappa)