netscaler.adc.authenticationvserver module – Configuration for authentication virtual server resource.

Note

This module is part of the netscaler.adc collection (version 2.6.0).

It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netscaler.adc.

To use it in a playbook, specify: netscaler.adc.authenticationvserver.

New in netscaler.adc 2.0.0

Synopsis

  • Configuration for authentication virtual server resource.

Parameters

Parameter

Comments

api_path

string

Base NITRO API path.

Define only in case of an ADM service proxy call

Default: "nitro/v1/config"

appflowlog

any

Log AppFlow flow information.

Choices:

  • "ENABLED"

  • "DISABLED"

authentication

any

Require users to be authenticated before sending traffic through this virtual server.

Choices:

  • "ON"

  • "OFF"

authenticationdomain

any

The domain of the authentication cookie set by Authentication vserver

authenticationvserver_auditnslogpolicy_binding

dictionary

Bindings for authenticationvserver_auditnslogpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_auditsyslogpolicy_binding

dictionary

Bindings for authenticationvserver_auditsyslogpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationcertpolicy_binding

dictionary

Bindings for authenticationvserver_authenticationcertpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationldappolicy_binding

dictionary

Bindings for authenticationvserver_authenticationldappolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationlocalpolicy_binding

dictionary

Bindings for authenticationvserver_authenticationlocalpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationloginschemapolicy_binding

dictionary

Bindings for authenticationvserver_authenticationloginschemapolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationnegotiatepolicy_binding

dictionary

Bindings for authenticationvserver_authenticationnegotiatepolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationoauthidppolicy_binding

dictionary

Bindings for authenticationvserver_authenticationoauthidppolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationpolicy_binding

dictionary

Bindings for authenticationvserver_authenticationpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationradiuspolicy_binding

dictionary

Bindings for authenticationvserver_authenticationradiuspolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationsamlidppolicy_binding

dictionary

Bindings for authenticationvserver_authenticationsamlidppolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationsamlpolicy_binding

dictionary

Bindings for authenticationvserver_authenticationsamlpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationsmartaccesspolicy_binding

dictionary

Bindings for authenticationvserver_authenticationsmartaccesspolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationtacacspolicy_binding

dictionary

Bindings for authenticationvserver_authenticationtacacspolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_authenticationwebauthpolicy_binding

dictionary

Bindings for authenticationvserver_authenticationwebauthpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_cachepolicy_binding

dictionary

Bindings for authenticationvserver_cachepolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_cspolicy_binding

dictionary

Bindings for authenticationvserver_cspolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_responderpolicy_binding

dictionary

Bindings for authenticationvserver_responderpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_rewritepolicy_binding

dictionary

Bindings for authenticationvserver_rewritepolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_tmsessionpolicy_binding

dictionary

Bindings for authenticationvserver_tmsessionpolicy_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

authenticationvserver_vpnportaltheme_binding

dictionary

Bindings for authenticationvserver_vpnportaltheme_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

certkeynames

any

Name of the certificate key that was bound to the corresponding SSL virtual server as the Certificate Authority for the device certificate

comment

any

Any comments associated with this virtual server.

failedlogintimeout

any

Number of minutes an account will be locked if user exceeds maximum permissible attempts

ipv46

string

IP address of the authentication virtual server, if a single IP address is assigned to the virtual server.

managed_netscaler_instance_id

string

added in netscaler.adc 2.6.0

The ID of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_ip

string

added in netscaler.adc 2.6.0

The IP of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_name

string

added in netscaler.adc 2.6.0

The name of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_password

string

added in netscaler.adc 2.6.0

The password of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

managed_netscaler_instance_username

string

added in netscaler.adc 2.6.0

The username of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

maxloginattempts

any

Maximum Number of login Attempts

name

any

Name for the new authentication virtual server.

Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Can be changed after the authentication virtual server is added by using the rename authentication vserver command.

The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication policy” or ‘my authentication policy’).

netscaler_console_as_proxy_server

boolean

added in netscaler.adc 2.6.0

The IP address of the NetScaler ADC appliance acting as a proxy server.

Define only in case of an ADM service proxy call

Choices:

  • false ← (default)

  • true

newname

string

New name of the authentication virtual server.

Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters.

The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, ‘my authentication policy’ or “my authentication policy”).

nitro_auth_token

string

The authentication token provided by a login operation.

nitro_pass

string

The password with which to authenticate to the NetScaler ADC node.

nitro_protocol

string

Which protocol to use when accessing the nitro API objects.

Choices:

  • "http"

  • "https" ← (default)

nitro_user

string

The username with which to authenticate to the NetScaler ADC node.

nsip

string / required

The ip address of the NetScaler ADC appliance where the nitro API calls will be made.

The port can be specified with the colon (:). E.g. 192.168.1.1:555.

port

integer

TCP port on which the virtual server accepts connections.

range

float

If you are creating a series of virtual servers with a range of IP addresses assigned to them, the length of the range.

The new range of authentication virtual servers will have IP addresses consecutively numbered, starting with the primary address specified with the IP Address parameter.

samesite

any

SameSite attribute value for Cookies generated in AAATM context. This attribute value will be appended only for the cookies which are specified in the builtin patset ns_cookies_samesite

Choices:

  • "None"

  • "LAX"

  • "STRICT"

save_config

boolean

If true the module will save the configuration on the NetScaler ADC node if it makes any changes.

The module will not save the configuration on the NetScaler ADC node if it made no changes.

Choices:

  • false ← (default)

  • true

servicetype

string

Protocol type of the authentication virtual server. Always SSL.

Choices:

  • "SSL"

state

string

The state of the resource being configured by the module on the NetScaler ADC node.

When present, the resource will be added/updated configured according to the module’s parameters.

When absent, the resource will be deleted from the NetScaler ADC node.

When enabled, the resource will be enabled on the NetScaler ADC node.

When disabled, the resource will be disabled on the NetScaler ADC node.

When unset, the resource will be unset on the NetScaler ADC node.

Choices:

  • "present" ← (default)

  • "absent"

  • "enabled"

  • "disabled"

  • "unset"

td

float

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

validate_certs

boolean

If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Choices:

  • false

  • true ← (default)

Notes

Note

Examples

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Indicates if any change is made by the module

Returned: always

Sample: true

diff

dictionary

Dictionary of before and after changes

Returned: always

Sample: {"after": {"key2": "pqr"}, "before": {"key1": "xyz"}, "prepared": "changes done"}

diff_list

list / elements=string

List of differences between the actual configured object and the configuration specified in the module

Returned: when changed

Sample: ["Attribute `key1` differs. Desired: (<class 'str'>) XYZ. Existing: (<class 'str'>) PQR"]

failed

boolean

Indicates if the module failed or not

Returned: always

Sample: false

loglines

list / elements=string

list of logged messages by the module

Returned: always

Sample: ["message 1", "message 2"]

Authors

  • Sumanth Lingappa (@sumanth-lingappa)