netscaler.adc.cluster module – Configuration for 0 resource.

Note

This module is part of the netscaler.adc collection (version 2.6.0).

It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netscaler.adc.

To use it in a playbook, specify: netscaler.adc.cluster.

New in netscaler.adc 2.0.0

Synopsis

  • Configuration for 0 resource.

Parameters

Parameter

Comments

api_path

string

Base NITRO API path.

Define only in case of an ADM service proxy call

Default: "nitro/v1/config"

clip

string

Cluster IP address to which to add the node.

clusternode_routemonitor_binding

dictionary

Bindings for clusternode_routemonitor_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_authenticationvserver_binding

dictionary

Bindings for clusternodegroup_authenticationvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_clusternode_binding

dictionary

Bindings for clusternodegroup_clusternode_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_crvserver_binding

dictionary

Bindings for clusternodegroup_crvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_csvserver_binding

dictionary

Bindings for clusternodegroup_csvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_gslbsite_binding

dictionary

Bindings for clusternodegroup_gslbsite_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_gslbvserver_binding

dictionary

Bindings for clusternodegroup_gslbvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_lbvserver_binding

dictionary

Bindings for clusternodegroup_lbvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_nslimitidentifier_binding

dictionary

Bindings for clusternodegroup_nslimitidentifier_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_service_binding

dictionary

Bindings for clusternodegroup_service_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_streamidentifier_binding

dictionary

Bindings for clusternodegroup_streamidentifier_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

clusternodegroup_vpnvserver_binding

dictionary

Bindings for clusternodegroup_vpnvserver_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

managed_netscaler_instance_id

string

added in netscaler.adc 2.6.0

The ID of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_ip

string

added in netscaler.adc 2.6.0

The IP of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_name

string

added in netscaler.adc 2.6.0

The name of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_password

string

added in netscaler.adc 2.6.0

The password of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

managed_netscaler_instance_username

string

added in netscaler.adc 2.6.0

The username of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

netscaler_console_as_proxy_server

boolean

added in netscaler.adc 2.6.0

The IP address of the NetScaler ADC appliance acting as a proxy server.

Define only in case of an ADM service proxy call

Choices:

  • false ← (default)

  • true

nitro_auth_token

string

The authentication token provided by a login operation.

nitro_pass

string

The password with which to authenticate to the NetScaler ADC node.

nitro_protocol

string

Which protocol to use when accessing the nitro API objects.

Choices:

  • "http"

  • "https" ← (default)

nitro_user

string

The username with which to authenticate to the NetScaler ADC node.

nsip

string / required

The ip address of the NetScaler ADC appliance where the nitro API calls will be made.

The port can be specified with the colon (:). E.g. 192.168.1.1:555.

password

string

Password for the nsroot account of the configuration coordinator (CCO).

save_config

boolean

If true the module will save the configuration on the NetScaler ADC node if it makes any changes.

The module will not save the configuration on the NetScaler ADC node if it made no changes.

Choices:

  • false ← (default)

  • true

state

string

The state of the resource being configured by the module on the NetScaler ADC node.

Default: "present"

validate_certs

boolean

If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Choices:

  • false

  • true ← (default)

Notes

Note

Examples

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Indicates if any change is made by the module

Returned: always

Sample: true

diff

dictionary

Dictionary of before and after changes

Returned: always

Sample: {"after": {"key2": "pqr"}, "before": {"key1": "xyz"}, "prepared": "changes done"}

diff_list

list / elements=string

List of differences between the actual configured object and the configuration specified in the module

Returned: when changed

Sample: ["Attribute `key1` differs. Desired: (<class 'str'>) XYZ. Existing: (<class 'str'>) PQR"]

failed

boolean

Indicates if the module failed or not

Returned: always

Sample: false

loglines

list / elements=string

list of logged messages by the module

Returned: always

Sample: ["message 1", "message 2"]

Authors

  • Sumanth Lingappa (@sumanth-lingappa)