netscaler.adc.vlan module – Configuration for “VLAN” resource.

Note

This module is part of the netscaler.adc collection (version 2.6.0).

It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netscaler.adc.

To use it in a playbook, specify: netscaler.adc.vlan.

New in netscaler.adc 2.0.0

Synopsis

  • Configuration for “VLAN” resource.

Parameters

Parameter

Comments

aliasname

any

A name for the VLAN. Must begin with a letter, a number, or the underscore symbol, and can consist of from 1 to 31 letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) characters. You should choose a name that helps identify the VLAN. However, you cannot perform any VLAN operation by specifying this name instead of the VLAN ID.

api_path

string

Base NITRO API path.

Define only in case of an ADM service proxy call

Default: "nitro/v1/config"

dynamicrouting

any

Enable dynamic routing on this VLAN.

Choices:

  • "ENABLED"

  • "DISABLED"

id

any

A positive integer that uniquely identifies a VLAN.

ipv6dynamicrouting

any

Enable all IPv6 dynamic routing protocols on this VLAN. Note: For the ENABLED setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line.

Choices:

  • "ENABLED"

  • "DISABLED"

managed_netscaler_instance_id

string

added in netscaler.adc 2.6.0

The ID of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_ip

string

added in netscaler.adc 2.6.0

The IP of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_name

string

added in netscaler.adc 2.6.0

The name of the managed NetScaler instance to which NetScaler Console

has to configure as a proxy server.

Define only in case of an ADM service proxy call

managed_netscaler_instance_password

string

added in netscaler.adc 2.6.0

The password of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

managed_netscaler_instance_username

string

added in netscaler.adc 2.6.0

The username of the managed NetScaler instance.

Define only in case of an ADM service proxy call

In Settings > Administration > System Configurations > Basic Settings,

if you select Prompt Credentials for Instance Login,

ensure to configure username and password of a managed instance.

mtu

any

Specifies the maximum transmission unit (MTU), in bytes. The MTU is the largest packet size, excluding 14 bytes of ethernet header and 4 bytes of crc, that can be transmitted and received over this VLAN.

netscaler_console_as_proxy_server

boolean

added in netscaler.adc 2.6.0

The IP address of the NetScaler ADC appliance acting as a proxy server.

Define only in case of an ADM service proxy call

Choices:

  • false ← (default)

  • true

nitro_auth_token

string

The authentication token provided by a login operation.

nitro_pass

string

The password with which to authenticate to the NetScaler ADC node.

nitro_protocol

string

Which protocol to use when accessing the nitro API objects.

Choices:

  • "http"

  • "https" ← (default)

nitro_user

string

The username with which to authenticate to the NetScaler ADC node.

nsip

string / required

The ip address of the NetScaler ADC appliance where the nitro API calls will be made.

The port can be specified with the colon (:). E.g. 192.168.1.1:555.

save_config

boolean

If true the module will save the configuration on the NetScaler ADC node if it makes any changes.

The module will not save the configuration on the NetScaler ADC node if it made no changes.

Choices:

  • false ← (default)

  • true

sharing

any

If sharing is enabled, then this vlan can be shared across multiple partitions by binding it to all those partitions. If sharing is disabled, then this vlan can be bound to only one of the partitions.

Choices:

  • "ENABLED"

  • "DISABLED"

state

string

The state of the resource being configured by the module on the NetScaler ADC node.

When present, the resource will be added/updated configured according to the module’s parameters.

When absent, the resource will be deleted from the NetScaler ADC node.

When unset, the resource will be unset on the NetScaler ADC node.

Choices:

  • "present" ← (default)

  • "absent"

  • "unset"

validate_certs

boolean

If false, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.

Choices:

  • false

  • true ← (default)

vlan_channel_binding

dictionary

Bindings for vlan_channel_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

vlan_interface_binding

dictionary

Bindings for vlan_interface_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

vlan_linkset_binding

dictionary

Bindings for vlan_linkset_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

vlan_nsip6_binding

dictionary

Bindings for vlan_nsip6_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

vlan_nsip_binding

dictionary

Bindings for vlan_nsip_binding resource

binding_members

list / elements=dictionary

List of binding members

Default: []

mode

string

The mode in which to configure the bindings.

If mode is set to desired, the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state.

If mode is set to bind, the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified.

If mode is set to unbind, the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified.

Choices:

  • "desired" ← (default)

  • "bind"

  • "unbind"

Notes

Note

Examples

---
- name: Sample Playbook
  hosts: localhost
  gather_facts: false
  tasks:
    - name: Sample Task | vlan
      delegate_to: localhost
      netscaler.adc.vlan:
        state: present
        id: '301'
        aliasname: client_side_network

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Indicates if any change is made by the module

Returned: always

Sample: true

diff

dictionary

Dictionary of before and after changes

Returned: always

Sample: {"after": {"key2": "pqr"}, "before": {"key1": "xyz"}, "prepared": "changes done"}

diff_list

list / elements=string

List of differences between the actual configured object and the configuration specified in the module

Returned: when changed

Sample: ["Attribute `key1` differs. Desired: (<class 'str'>) XYZ. Existing: (<class 'str'>) PQR"]

failed

boolean

Indicates if the module failed or not

Returned: always

Sample: false

loglines

list / elements=string

list of logged messages by the module

Returned: always

Sample: ["message 1", "message 2"]

Authors

  • Sumanth Lingappa (@sumanth-lingappa)